|
|
Cruiser
Posts: 111
Salina, KS | I just recently acquired a 2011 Vision with 16k miles. The previous owner had put mirrors in the hand control housings and I removed them. Now I have two open holes and a couple places where the finish was removed by the mirror bases....my question is what have others put in these to dress up their ride. I'm aware plugs were there originally but looking for other ideas. |
|
| |
|
Visionary
Posts: 1290
Ruskin, Fl | It's funny you mention that, because my bike was at the dealer and came back missing one of those plugs. It's driving me crazy. If you find out where to get them please let me know. |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | I put two RAM balls there. Don't really use them, but they're there if I want to. Maybe Camera, Phone, SPOT tracker, RADAR, Drink holder..... who knows. |
|
| |
|
Visionary
Posts: 4278
| any hardware store sells black plastic plugs. If you can't measure the hole ask them if you can take some out and try |
|
| |
|
Visionary
Posts: 1365
Central Maryland | Or you could just slap some Bondo or JB Weld into that sucker, wait for it to dry, and then sand it flat. Couple thin coats of flat black spray paint; and she'll look better than original. |
|
| |
|
Visionary
Posts: 1350
| I have a ram mount for Spot in the right one. I have a shiny silver plug in the left I got at a truck stop years ago. |
|
| |
|
Tourer
Posts: 341
West Salem, WI United States | +1 on the ram balls. |
|
| |
|
Visionary
Posts: 3773
Pittsburgh, PA | on my 11 vision it has 2 BALLS... lol ram mount balls.. and on the left on i have my gsp /cellphone that i take on and off from time to time. and on the right on i have a removable drink holder.. its really nice on trips... |
|
| |
|
Cruiser
Posts: 209
| could mount your favorite bobble-heads there....... |
|
| |
|
Tourer
Posts: 573
Central Illinois | 10 mm hole so a 10 mm plug or maybe even a 3/8 inch plug will take care of it. Try your local hardware store. |
|
| |
|
Tourer
Posts: 416
Prairie City, IA United States | I have the mirrorson the handlebars. I recommend you ride it without them for a while and make sure you have good visibility with the fairing mirrors. I put different bars on and couldn't see a thing after that. |
|
| |
Back in the saddle and a question