Taking apart my Vision

mannymo Posted 2014-09-22 11:31 AM (#167015) Subject: Taking apart my Vision Puddle Jumper Posts: 21 I've had my 2014 vision for about a month. now I want to add amp, speakers, lights...... Is there a guide or something that illustrates how to take all the trim/body panels off? Bashcars Posted 2014-09-22 11:47 AM (#167018 - in reply to #167015) Subject: Re: Taking apart my Vision Cruiser Posts: 115 Katy, TX United States The Service Manual. You can buy one from Ma Vic. Lotzafun Posted 2014-09-22 6:09 PM (#167019 - in reply to #167015) Subject: Re: Taking apart my Vision Iron Butt Posts: 935 Rockford, IL The link in the post linked below will have all the info you need...... http://www.vision-riders.com/bb/forums/thread-view.asp?tid=1924&pos... http://www.mediafire.com/?8s7n9b9p3ep91 johnnyvision Posted 2014-09-22 6:25 PM (#167020 - in reply to #167015) Subject: Re: Taking apart my Vision Visionary Posts: 4278 Not sure how to tell you I just started pulling it a part two days after I bought it (user3229_pic52_1285098939.jpg) Attachments ---------------- user3229_pic52_1285098939.jpg (65KB - 4 downloads) icemann Posted 2014-09-26 1:03 PM (#167084 - in reply to #167015) Subject: Re: Taking apart my Vision Cruiser Posts: 167 , OH don't know if this helps but mine is naked. http://www.vision-riders.com/bb/forums/thread-view.asp?tid=17703&po... Regulator444 Posted 2014-10-02 5:58 AM (#167165 - in reply to #167015) Subject: Re: Taking apart my Vision Puddle Jumper Posts: 10 St. Paul, MN You can also visit VictoryHID. Go to the Vision tab, click then look for the instalation instructions. detailed on what to take off first. Y will eventually strip all body pannels forward of the seat..... www.victoryHID.com Reg44 Edited by Regulator444 2014-10-02 5:59 AM