Extra wires on 2011 Vision
Elroythekid
Posted 2014-06-29 7:42 AM (#160786)
Subject: Extra wires on 2011 Vision


Puddle Jumper

Posts: 12
Halifax, Nova Scotia, Canada
I bought a smashed 2011 Vision. It was apart when I got so now I'm trying to put it back together. I have a couple connectors behind the panel above the headlight I have no home for and one that starts on a plastic grommet on the back of the left mirror pod? It terminates in plastic so it's obviously a sensor or antennae? Any ideas would be appreciated.
Top of the page Bottom of the page
LA Victory Rider
Posted 2014-06-29 11:34 AM (#160791 - in reply to #160786)
Subject: Re: Extra wires on 2011 Vision


Cruiser

Posts: 241
Monrovia, Ca
There are a few connectors not used for what ever reason. the one on the left mirror is for the temperature sensor.
Top of the page Bottom of the page
johnnyvision
Posted 2014-06-29 6:10 PM (#160799 - in reply to #160786)
Subject: Re: Extra wires on 2011 Vision


Visionary

Posts: 4278
if the connector your asking about looks like this its for the temp gauge. Zip tie it below faring for accurate reading



(temp.jpg)



Attachments
----------------
Attachments temp.jpg (40KB - 0 downloads)
Top of the page Bottom of the page
Elroythekid
Posted 2014-07-01 6:20 AM (#160861 - in reply to #160786)
Subject: Re: Extra wires on 2011 Vision


Puddle Jumper

Posts: 12
Halifax, Nova Scotia, Canada
That's the one. I don't have a place to plug it in? It's attached to the back of the mirror. Don't know where the connector goes and don't seem to have a place for it?
Top of the page Bottom of the page
Arkainzeye
Posted 2014-07-01 7:27 AM (#160863 - in reply to #160786)
Subject: Re: Extra wires on 2011 Vision


Visionary

Posts: 3773
Pittsburgh, PA
you could look at the parts list if there are other connection point that you dont know what they are for.. i know on my 2011 model i have found (so far) 4 connections that arent being used. http://parts.polarisind.com/Browse/Browse.asp
Top of the page Bottom of the page
johnnyvision
Posted 2014-07-01 6:15 PM (#160885 - in reply to #160786)
Subject: Re: Extra wires on 2011 Vision


Visionary

Posts: 4278
<p>what color is the conector end. It must be a two pin conector some place.</p>

Edited by johnnyvision 2014-07-01 6:18 PM
Top of the page Bottom of the page
Elroythekid
Posted 2014-07-18 6:25 PM (#163429 - in reply to #160786)
Subject: RE: Extra wires on 2011 Vision


Puddle Jumper

Posts: 12
Halifax, Nova Scotia, Canada
Sorry, been on the road just got home. I'm hoping the last few parts I have ordered are in so I can put a serious effort into assembling early next week. I want to ride it a little and then break it down for paint. The previous owner painted it cream, with.... Tan... Yes tan ... Flames,,, and,,,,,, fake airbrushed WOODGRAIN....... It hideous,,, I think I'm going to keep this as my daily rider, I really like the bike so far.
Top of the page Bottom of the page
Elroythekid
Posted 2014-07-18 6:29 PM (#163430 - in reply to #160786)
Subject: RE: Extra wires on 2011 Vision


Puddle Jumper

Posts: 12
Halifax, Nova Scotia, Canada
Beautiful airbrushed tan flames.



(image.jpg)



Attachments
----------------
Attachments image.jpg (85KB - 0 downloads)
Top of the page Bottom of the page
Elroythekid
Posted 2014-07-18 6:31 PM (#163431 - in reply to #160786)
Subject: RE: Extra wires on 2011 Vision


Puddle Jumper

Posts: 12
Halifax, Nova Scotia, Canada
And wood grain.........



(image.jpg)



Attachments
----------------
Attachments image.jpg (75KB - 0 downloads)
Top of the page Bottom of the page
Elroythekid
Posted 2014-07-18 6:37 PM (#163432 - in reply to #160786)
Subject: Re: Extra wires on 2011 Vision


Puddle Jumper

Posts: 12
Halifax, Nova Scotia, Canada
I have a dip kit I'm going to experiment with, have carbon fibre pattern I want to try on the centre console and mirror/ speaker pods. The rest of the bike I'm not sure, maybe all black, or black, copper pearl, or a nice blue pearl with some pop in it. Any pics/suggestions of paint schemes would be appreciated.
Top of the page Bottom of the page