|
|
Cruiser
Posts: 116
| I am trying to verify my ride height on the rear of my Vision and wanted to know what is the standard height with 30 psi. Would someone be willing to measure theirs and let me know what it is? Here is how I did mine.
(ride height.jpg)
Attachments
----------------
 ride height.jpg (8KB - 4 downloads)
|
|
| |
|
Cruiser
Posts: 116
| Anyone want to help a brother out? |
|
| |
|
Visionary
Posts: 4278
| shot I measured ground clearance and it was 4 inches |
|
| |
|
Visionary
Posts: 4278
| Dwight - 2014-04-11 9:17 AM I am trying to verify my ride height on the rear of my Vision and wanted to know what is the standard height with 30 psi. Would someone be willing to measure theirs and let me know what it is? Here is how I did mine. think about it with every one running different tire it will be different. Beside what difference would it make. Put it at what you like with you sitting on the bike. What ares is will not help you |
|
| |
|
Cruiser
Posts: 116
| I meant the air shock is at 30 psi. I am just trying to keep from breaking my bags when running 2 up. Thanks |
|
| |
|
Tourer
Posts: 573
Central Illinois | Read the sticker on your bike and pump up your air pressure to match the load. 30 psi is really low pressure for 2 up riding. |
|
| |
|
Cruiser
Posts: 116
| I know it is low for 2 up, what I was hoping to find out is what is the standard ride height of a normal height suspension at 30 psi in the air shock. Then I will compare it to mine just to see if my bike is an inch lower in the rear or not. I adjusted my suspension rod and I was trying to make sure I only dropped an inch without pulling the rod out to measure...Dwight |
|
| |
|
Visionary
Posts: 4278
| Not the truth comes out.
Victory say ground clearance on stock bike is 5.8 inch. Guessing they measure from bottom of motor to ground. Like I said mine is 4 inches and yeas I lowered mine 2 inches |
|
| |
|
Cruiser
Posts: 116
| That will work, thanks Dwight |
|
| |