S1L2 Exhaust
vision2012
Posted 2013-09-23 11:53 AM (#145832)
Subject: S1L2 Exhaust


Puddle Jumper

Posts: 33
Georgia		Has anyone with the Victory S1L2 slipons on a Vision removed the baffles? If so, how did they sound and how hard were the baffles to remove? I removed the 2 set screws from mine but was unable to get the baffles out.
Thanks
Top of the page Bottom of the page
viclvr
Posted 2013-09-23 1:50 PM (#145835 - in reply to #145832)
Subject: Re: S1L2 Exhaust


Cruiser

Posts: 92
Princeton, MN		I had mine re-cored with atom bomb baffles,, they rock and make HP!
Top of the page Bottom of the page
diamonbird
Posted 2013-09-23 7:02 PM (#145839 - in reply to #145832)
Subject: Re: S1L2 Exhaust


Cruiser

Posts: 251
Mechanicsville, VA United States		No baffles in no power out, when I got my vision(used) the guy had gutted them and installed straight pipes inside them, you couldn't pull off without cranking the rpm's up to 2500 rpms...loud as crap too. I bought new S1S2 on ebay installed them and now I can hear my radio and I can pull off like is supposed too.
Top of the page Bottom of the page
vision2012
Posted 2013-09-23 7:58 PM (#145841 - in reply to #145839)
Subject: Re: S1L2 Exhaust


Puddle Jumper

Posts: 33
Georgia		Thanks diamonbird
Top of the page Bottom of the page
cw1115
Posted 2013-09-24 8:12 AM (#145848 - in reply to #145832)
Subject: Re: S1L2 Exhaust


Visionary

Posts: 1290
Ruskin, Fl		I too have the S1L2 with Atom Bomb mod. Not as loud as the Ness Honkers on my last Vision, but they sound great and look much better than stock.
Top of the page Bottom of the page