|
|
Puddle Jumper
Posts: 45
| Have a 2009 vision with a rear front fender broken after thw mount on the right hand side. Took it in two weeks ago and today they installed a new replacement fender at no charge to me. Hats off to Maxim powersprts of Merriville Indiana and their great service department and Rick the head of service. |
|
| |
|
Visionary
Posts: 4278
| on my 08 I was told no tuff luck. Glace auto store sell epoxy |
|
| |
|
Cruiser
Posts: 166
Bullhead City, AZ | I had the front half plastic welded once . broke same place so I JB welded it myself and at 8000 miles still holding. The back half has the bolt tab completely gone still looking at a way to JB that also. Kewl metal has a one piece steel that they will paint match or chrome that may be another option. One of the guys in Prescott had the back half fall off and jam the front tire. I bet that made him pucker. |
|
| |
|
Puddle Jumper
Posts: 45
| Went with j/b weld two times both lasted about 10 miles thankfully I got a new replacement as the epoxy would not hold |
|
| |
|
Iron Butt
Posts: 1066
Peru, IN | HMD has both a front and a rear. The front is closer to the tire and the rear is 5" deeper/lower. He said each part will interchange with the OEM part. (i.e. The OEM front can be used with the HMD rear and vice versa.) |
|
| |
|
Tourer
Posts: 494
Akron Ohio area | If even one of the bolts is missing or broken through, the rear black front fender can become wedged into the lower plastic maw and make it so you can't steer.
This happened to me on my last trip out west.
NOT FUN. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | I used steel strapping, has worked solid for 3 years now. Didn't trust replacements and couldn't afford anything else. No knows but me, and you who I've told. |
|
| |
Fender problems