Clunk in Frontend on Sharp Bump
Udnudn1968
Posted 2013-05-19 3:23 PM (#139185)
Subject: Clunk in Frontend on Sharp Bump


Puddle Jumper

Posts: 33
Noticed today I have quite the clunk in the frontend somewhere when I hit a sharp bump. Any suggestions on what I might check?

Thanks

Steve
Top of the page Bottom of the page
johnnyvision
Posted 2013-05-19 6:13 PM (#139195 - in reply to #139185)
Subject: Re: Clunk in Frontend on Sharp Bump


Visionary

Posts: 4278
find a curb and try slowly running into and see what you here.
Maybe time for new fluid
pound on belly pan with your fist
check all bolts on front fender see if there tight
Top of the page Bottom of the page
Udnudn1968
Posted 2013-05-19 8:24 PM (#139207 - in reply to #139195)
Subject: Re: Clunk in Frontend on Sharp Bump


Puddle Jumper

Posts: 33
Dont know when it was serviced, cause I bought the bike last August. May have to look into that!

Thanks
Top of the page Bottom of the page
relic123
Posted 2013-05-21 1:35 AM (#139285 - in reply to #139185)
Subject: Re: Clunk in Frontend on Sharp Bump


Cruiser

Posts: 61
Southeast Idaho		check you front fender for cracks around the mounting holes, Mine was broke and making all sort of racket
Top of the page Bottom of the page
2juggs
Posted 2013-05-21 8:01 PM (#139344 - in reply to #139185)
Subject: RE: Clunk in Frontend on Sharp Bump


Puddle Jumper

Posts: 14
Mine was also the front fender, the rear section of it. Or the rear front fender as its known, about $110 Canadian for a new one
Top of the page Bottom of the page