Vision Cover
firehawk
Posted 2008-07-10 10:02 PM (#13335)
Subject: Vision Cover


Cruiser

Posts: 74
College Station, Tx

I think I may have gotten a bad cover or I just cannot seem to get it to fit correctly. There is a zipper on the trunk

section that I cannot for the life of me figure out what it is for. It looks to me like it should go on the other side

where the antenna is. Can anyone help me decide if I should send it back or is it like it is supposed to be? I am going to

Try and attach pics of it. Also notice how it sags under the trunk...ugly



Edited by firehawk 2008-07-10 10:04 PM




(vision cover 005.jpg)



(vision cover 004.jpg)



(vision cover 001.jpg)



Attachments
----------------
Attachments vision cover 005.jpg (59KB - 8 downloads)
Attachments vision cover 004.jpg (48KB - 1 downloads)
Attachments vision cover 001.jpg (46KB - 1 downloads)
Top of the page Bottom of the page
devilboy
Posted 2008-07-11 6:33 AM (#13342 - in reply to #13335)
Subject: RE: Vision Cover


Cruiser

Posts: 296
Central Florida
zipper is opened to fit on trunk. When trunk is off(or you have a street) the zipper is closed so cover fits contours of bike!
Top of the page Bottom of the page
victory2002
Posted 2008-07-11 7:02 AM (#13344 - in reply to #13335)
Subject: RE: Vision Cover


Cruiser

Posts: 102
Northeast Pennsylvania
LOL..looks like you pulled it too far to the back. the zipper is for the flag(?) thats on the top of trunk, I'll need to look at mine again today but I thought there were 2 openings on either side. you need to lay that end over the trunk and the cover lays more on the seat..not pulled all tight toward the back like that. cover is made to lay over bike...nothing is pulled tight after laying it over. It took me a couple of times to get the right evolution to put it on..I put the cover loosely over trunk then pull the rest forward over front of bike then pull the back down over mufflers. It will set nicely with no tight pulls anywhere. Hope this helps.
Top of the page Bottom of the page
firehawk
Posted 2008-07-11 9:26 AM (#13348 - in reply to #13344)
Subject: RE: Vision Cover


Cruiser

Posts: 74
College Station, Tx

victory2002 - 2008-07-11 6:02 AM LOL..looks like you pulled it too far to the back. the zipper is for the flag(?) thats on the top of trunk, I'll need to look at mine again today but I thought there were 2 openings on either side. you need to lay that end over the trunk and the cover lays more on the seat..not pulled all tight toward the back like that. cover is made to lay over bike...nothing is pulled tight after laying it over. It took me a couple of times to get the right evolution to put it on..I put the cover loosely over trunk then pull the rest forward over front of bike then pull the back down over mufflers. It will set nicely with no tight pulls anywhere. Hope this helps.

Yes that helps thank you....This is why I love this forum.

Top of the page Bottom of the page
STARSHIP 1
Posted 2008-07-11 11:33 AM (#13355 - in reply to #13335)
Subject: Re: Vision Cover


Cruiser

Posts: 137
Houston, Texas
I have one and the zipper for the antenna is on the left side.....perhaps you have the cover inside out.
Top of the page Bottom of the page
firehawk
Posted 2008-07-11 11:42 AM (#13356 - in reply to #13355)
Subject: Re: Vision Cover


Cruiser

Posts: 74
College Station, Tx

STARSHIP 1 - 2008-07-11 10:33 AM I have one and the zipper for the antenna is on the left side.....perhaps you have the cover inside out.

I thought about that but if I flipped it the zipper for the trunk part would be against the paint.

Top of the page Bottom of the page