counselremoval
gary1
Posted 2013-03-30 5:22 PM (#133905)
Subject: counselremoval


Puddle Jumper

Posts: 43
could any tell me how to remove the center counsel i took the 2 bolts off that were visible and pull up on it didnt want to break anything want to install top filter
Top of the page Bottom of the page
johnnyvision
Posted 2013-03-30 5:44 PM (#133908 - in reply to #133905)
Subject: Re: counselremoval


Visionary

Posts: 4278
pull chrome gauge cover might need a flat kitchen knife prey off 2 bolts there open glove box bolt there and the bolts at the end of panel
Take masking tape and label all your wires
Top of the page Bottom of the page
gary1
Posted 2013-03-30 5:58 PM (#133912 - in reply to #133905)
Subject: Re: counselremoval


Puddle Jumper

Posts: 43
sorry obout that so i will have to take the gauge cluster off first by prying up or out then their is two more bolts under there correct
2012 vv sunset red

Top of the page Bottom of the page
willtill
Posted 2013-03-30 6:24 PM (#133914 - in reply to #133905)
Subject: Re: counselremoval


Visionary

Posts: 1365
Central Maryland
Hopefully you can see this:



I just got done removing mine; in anticipation of the upper air filter install.

Edited by willtill 2013-03-30 6:26 PM
Top of the page Bottom of the page
gary1
Posted 2013-03-30 6:43 PM (#133915 - in reply to #133914)
Subject: Re: counselremoval


Puddle Jumper

Posts: 43
thanks that should help alot the gauge cluster prys up then was the filter worth the money mine is al stock just want a little more off the bottem

2012 vv
3500 miles
Top of the page Bottom of the page
johnnyvision
Posted 2013-03-31 7:01 PM (#133993 - in reply to #133915)
Subject: Re: counselremoval


Visionary

Posts: 4278

gary1 - 2013-03-30 6:43 PM thanks that should help alot the gauge cluster prys up then was the filter worth the money mine is al stock just want a little more off the bottem 2012 vv 3500 miles

Yes the filter is worht it.  

 

Top of the page Bottom of the page