|
|
Cruiser
Posts: 136
CALGARY ALBERTA | I am assembling my 2008 after some damage in a trailer accident.
1400.00 in parts and I do the work
But still alive to tell this.
I don't know where the black wire from the instrument cluster harness goes
(DSC01360.jpg)
Attachments
----------------
 DSC01360.jpg (58KB - 0 downloads)
|
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | Temp gauge. Originally attached to the inside of left mirror. Many have moved it lower for more accuracy.
Edited by Nozzledog 2013-03-17 7:57 PM
|
|
| |
|
Puddle Jumper
Posts: 25
Wiscasset, ME | This wire senses the temperature of the outside ambient air . A lot of guys move it down near the forks at the bottom of the front fairing to get a true temperature.  |
|
| |
|
Fountain Inn, SC United States | That ring connector isn't the actual temp sensor. Isn't the sensor at the other end of the wire? So where does he attach it the end in question? |
|
| |
|
Cruiser
Posts: 136
CALGARY ALBERTA | That explains why I don't see any friction marks on the connector. Must have been loose behind mirror. That's where I received the damage. I'll move it down as per suggestions. Thanks |
|
| |
|
Visionary
Posts: 4278
| try this turn key on hold match "BY" terminal and see if temp goes up.
Behind left hand mirror is a slot in the plastic where the wire is pinched in place.
I moved mine down and have checked with several smart phones and now am dead on and laugh at all the banks there are not even close.
(IMG_0379.JPG)
Attachments
----------------
IMG_0379.JPG (56KB - 0 downloads)
|
|
| |