|
|
Puddle Jumper
Posts: 21
Fernandina Beach, Florida | Need some collective wisdom, please. I'm trying to fit a "plug and play" HID cyclops (center) bulb to my 2012 Vision. So far I have tried an HIDSRus unit (poor performance) and VictoryHID setup which does not come equipped with the right connector for the 2012 wiring harness for ther center light.
Any other ideas? Has anyone siuccessfully installed and satisfactorily used an aftermarket bulb/ballast/wiring solution that works in a 2012-2013 Vision that does not have the factory HID unit?
Any and all ideas are appreciated!
Merry Christmas and Happy New Year to all! |
|
| |
|
Visionary
Posts: 4278
| <p>here you go. Check out bulb wattage</p><p><a href="http://www.victoryhid.com/index.php">http://www.victoryhid.com/index.php</a></p><p> </p><p><a href="http://www.ddmtuning.com/Products/DDM-35W-55W-Dual-Motorcycle-HID-Kit">http://www.ddmtuning.com/Products/DDM-35W-55W-Dual-Motorcycle-HID-Kit</a></p>
Edited by johnnyvision 2012-12-22 5:50 PM
|
|
| |
|
Visionary
Posts: 4278
| http://www.victoryhid.com/index.php
http://www.ddmtuning.com/Products/DDM-35W-55W-Dual-Motorcycle-HID-K... |
|
| |
|
Puddle Jumper
Posts: 21
Fernandina Beach, Florida | Well, after CR from VictoryHID supplied a correct adapter to my 2012 Vision, I was able to successfully install his kit. Thanks to him for coming through. Here are some pics. Have yet to check it out at night, but dayytime performance looks great.
Happy (and safe) New Year to all.
(HID on (100x75).jpg)
(HID off (100x75).jpg)
Attachments
----------------
 HID on (100x75).jpg (30KB - 7 downloads)
HID off (100x75).jpg (35KB - 3 downloads)
|
|
| |