|
|
Cruiser
Posts: 92
| Has any one installed the DGD-KIM-V2 on their Vision? I need to know where and and what wires where tapped into to complete the installation. I got the installation instructions but they are not specific to the Vision (i.e. I don't have a head light bucket). Just wondering where and what wires were tapped into to complete installation. Any help is appreciated. Thanks In advance!!  |
|
| |
|
Visionary
Posts: 4278
| I just read the instructions. Looks very easy you just have to apply it to your bike. Look for your relay under the top cover read your owners book to see the relay you need. It tells you all the wires you just have to find the ones there talking about |
|
| |
|
Cruiser
Posts: 92
| That is the instruction for the just the no start Dawg, I have the one that replaces the ignition switch. There is no need to replace the relay with the V2. I dont know how much I have to tear into the front just to ge at the wiring. Really waiting for cooler days when I'm not riding. Just need a more exact location where everyone else taped into the harness. |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | Johnny, did you get your Digital Dawg relay installed? I got one for Christmas and the instructions were for HD, and the stuff on the internet says to use the ECM relay but on my 2011 Vision I only have an "Engine Relay" and a "Fuel Pump/Ignition Coil" relay. Based on my multimeter readings I assume I am to use the "Fuel Pump/Ignition Coil" relay. I have called Digital Dawg twice and they have not called me back yet. And I just want to instal my new toy and ride!! So ........ do you know which relay to use on my Vision? |
|
| |
|
Iron Butt
Posts: 880
Orlando, FL | Never mind, figger'd it out. |
|
| |
|
Puddle Jumper
Posts: 12
| MaddMAx2u - 2012-12-28 6:49 PM
Never mind, figger'd it out.
Give up the info.
I'm going to be making a video for DGD on the Vision Install ass soon as I can find the time to get it done and in the proper place.
I was planning on taking the bike apart and chasing where to install it and do a test run and then reassemble and do the video.
Have you got any tips? |
|
| |
Digital Guard Gawg