vision burnout
lova
Posted 2012-11-03 7:53 PM (#126153)
Subject: vision burnout


Cruiser

Posts: 142
check this out

http://www.youtube.com/watch?v=O3cvgF7r8jc&feature=share&list=UUvmL...

time for a new tire.....but burn it first



cheers!
Top of the page Bottom of the page
roundtwig
Posted 2012-11-03 9:48 PM (#126161 - in reply to #126153)
Subject: RE: vision burnout


Cruiser

Posts: 233
flagstaff, AZ
When my CT needs to be replaced I plan on trying it as well. Enjoyed the vid, did you use just water or a little veg oil?
Top of the page Bottom of the page
Arkainzeye
Posted 2012-11-04 6:37 AM (#126171 - in reply to #126153)
Subject: Re: vision burnout


Visionary

Posts: 3773
Pittsburgh, PA
i saw a HD do a burn out once then all the sudden SNAP! there went the belt...
Top of the page Bottom of the page
XRsteve
Posted 2012-11-04 7:20 AM (#126172 - in reply to #126153)
Subject: Re: vision burnout


Visionary

Posts: 2300
Georgia, west of Atlanta
That is the way to get rid of an old tire...............
Top of the page Bottom of the page
lova
Posted 2012-11-04 8:20 AM (#126175 - in reply to #126153)
Subject: Re: vision burnout


Cruiser

Posts: 142
@roundtwig - thanks!
@arkainzeye - man i was glad the tire didnt pop

cheers!
Top of the page Bottom of the page
glighto11
Posted 2012-11-04 11:37 AM (#126184 - in reply to #126153)
Subject: Re: vision burnout


Iron Butt

Posts: 741
Central New York
One has to wonder it this may be one of our future posters that complain about Victory design flaws; belt broke after only 25k, rear wheel bearings just blew out, rear rim doesn't track true.
Top of the page Bottom of the page
Chico7z
Posted 2012-11-05 9:43 AM (#126225 - in reply to #126184)
Subject: Re: vision burnout


Cruiser

Posts: 170
Barrington, NH
glighto11 - 2012-11-04 11:37 AM

One has to wonder it this may be one of our future posters that complain about Victory design flaws; belt broke after only 25k, rear wheel bearings just blew out, rear rim doesn't track true.


I have almost 28k on my CC, since July 2010, with multiple burnouts and 4500rpm launches at the dragway and the belt hasnt snapped yet. Not sure how burnout would effect the wheel bearings or wheel trueness?? I am also still on my original clutch, no slipping...

Carl
Top of the page Bottom of the page
cook06vegas
Posted 2012-11-05 10:38 AM (#126230 - in reply to #126153)
Subject: Re: vision burnout


Tourer

Posts: 373
Lansing, MI

DAMN, I can't watch it at work..
Top of the page Bottom of the page
lova
Posted 2012-11-05 10:57 AM (#126235 - in reply to #126225)
Subject: Re: vision burnout


Cruiser

Posts: 142
Chico7z - 2012-11-05 9:43 AM

glighto11 - 2012-11-04 11:37 AM

One has to wonder it this may be one of our future posters that complain about Victory design flaws; belt broke after only 25k, rear wheel bearings just blew out, rear rim doesn't track true.


I have almost 28k on my CC, since July 2010, with multiple burnouts and 4500rpm launches at the dragway and the belt hasnt snapped yet. Not sure how burnout would effect the wheel bearings or wheel trueness?? I am also still on my original clutch, no slipping...

Carl


Same here...about 24K since Dec 2010, i ride it like i stole it and dragway too ...so far so good

no rice...no pig...PURE BEEF baybay!!!

cheers!
Top of the page Bottom of the page
PhantomX
Posted 2012-11-05 9:34 PM (#126272 - in reply to #126153)
Subject: Re: vision burnout


Cruiser

Posts: 259
Land O Lakes, FL
I love the smell of burnt rubber in the morning...

Edited by PhantomX 2012-11-05 9:34 PM
Top of the page Bottom of the page
Blackjack
Posted 2012-11-06 7:50 AM (#126288 - in reply to #126153)
Subject: Re: vision burnout


Tourer

Posts: 367
Cottage Grove, Mn
For me it's cordite in the morning....
Top of the page Bottom of the page