|
|
Puddle Jumper
Posts: 11
| So here's the latest update on sequential Blinkers.
The engineering firm that I am using to develop the new hardware and software is working diligently on the front and rear boards. There is however some issues with programming and component selection that we are working out. All obstacles can be overcome and in time, when the lights are ready, they will be distributed. I am just as eager to start distributing the product and seeing people enjoy them as you are to get them.
Please be patient and realize the huge undertaking it is to come up with an idea and then to actually get it to market. As the lights progress and new developments arise, I will try and keep everyone informed as to their progress, but as for now, don't expect to see them too soon. My timeline has been totally pushed off with component lead times and engineering hurdles. Earliest estimate will be in the fall. If you are unable to wait for this product to be available, there are always the lower quality copy cats you can turn to, but don't expect Korea to be concerned if you have an issue.
Remember...if this was easy, everyone would be doing it.
Thank You for your patience,
Made In USA,
Flash ME Technologies
|
|
| |
|
Tourer
Posts: 499
Chattanooga, TN | I'm holding my breath until I turn blue and pass out. I really cannot wait any longer!
Edited by baadawg 2012-06-03 7:55 PM
|
|
| |
|
New user
Posts: 1
| Will be waiting........ |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | Thanks for the update. I can wait.
Marriage is Gods way of teaching men patience. It is a long lesson.
Take care. |
|
| |
|
Iron Butt
Posts: 741
Central New York | Flash ME Tech - 2012-06-03 1:52 PM So here's the latest update on sequential Blinkers. The engineering firm that I am using to develop the new hardware and software is working diligently on the front and rear boards. There is however some issues with programming and component selection that we are working out. All obstacles can be overcome and in time, when the lights are ready, they will be distributed. I am just as eager to start distributing the product and seeing people enjoy them as you are to get them. Please be patient and realize the huge undertaking it is to come up with an idea and then to actually get it to market. As the lights progress and new developments arise, I will try and keep everyone informed as to their progress, but as for now, don't expect to see them too soon. My timeline has been totally pushed off with component lead times and engineering hurdles. Earliest estimate will be in the fall. If you are unable to wait for this product to be available, there are always the lower quality copy cats you can turn to, but don't expect Korea to be concerned if you have an issue. Remember...if this was easy, everyone would be doing it. Thank You for your patience, Made In USA, Flash ME Technologies I am sure you won't mind if I take exception to your comment about "low cost copy cats" being under your heading of "Sequential Lighting"! |
|
| |
|
Fountain Inn, SC United States | glighto11, no worries, I don't think he meant you as the copycat, it was the cheap overseas LED version that he was speaking to that someone posted a month or so ago. Besides, your incandescent version was the first to hit the market!
It's nice to have different taillight options to choose from.
|
|
| |
|
Tourer
Posts: 390
| I am also waiting. I know the problems of producing parts. Prototypes are easy....production is about reliability and consistency and always takes more time. |
|
| |
|
Cruiser
Posts: 216
Danville, CA | Waiting patiently and look forward to the delivery of a high quality solution.. Thanks for the update.. |
|
| |
|
Visionary
Posts: 4278
| Flash ME Technologies
Is the front one available now?
|
|
| |
|
Tourer
Posts: 323
Troy, NY | Thanks for the update. Is the pricing set at all? |
|
| |
|
Cruiser
Posts: 105
| It's now August. Any more word on these tail lights?
Jim |
|
| |
Sequential Lighting Update