|
|
Cruiser
Posts: 102
Orlando | At about 3000 RPM I get so much vibration from my Left hand mirror it is unusable. No issue with the Right.
I have tightened, removed and reinstalled, pushed, pulled… no help, it still vibrates.
Any others experienced this issue? If so, what is the fix?
|
|
| |
|
Iron Butt
Posts: 623
| make sure lower outside tab is in its slot.... also wheel weights stuck to the back of the mirror does wonders....I have 3 .o5 oz weights at the 12 oclock postion on the back of my mirror and 3 more at the 7 o clock postion....vibration is gone at all speeds
|
|
| |
|
Cruiser
Posts: 118
Capitol Region of NH | Join the crowd. Common problem with the Vision. You learn to live with it. |
|
| |
|
Cruiser
Posts: 102
Orlando | jeffmack - 2012-03-22 1:12 PM make sure lower outside tab is in its slot.... also wheel weights stuck to the back of the mirror does wonders....I have 3 .o5 oz weights at the 12 oclock postion on the back of my mirror and 3 more at the 7 o clock postion....vibration is gone at all speeds Just got some stick-on wheel weights... Hope it works! |
|
| |
|
Cruiser
Posts: 102
Jal NM | Nope never had a problem with this, but I hope you get it fixed. Peace to you and ride safe bruther. |
|
| |
|
Tourer
Posts: 500
| My tech guy at dealer put 3 or 4 small pieces of dense foam around edges of mirrors..A little visible from the outside edges, but pretty much eliminated the issue..... |
|
| |
|
Iron Butt
Posts: 1109
| SkooterRob - 2012-03-22 2:47 PM Nope never had a problem with this, but I hope you get it fixed. Peace to you and ride safe bruther. +1 |
|
| |
|
Iron Butt
Posts: 935
Rockford, IL | Remove the valance panel below the windshield and grab a flashlight and look at the backside of the mirror and you will see a bolt in the center.....tighten it up a little bit. Just a 1/4 turn or so and it will probably eliminate the vibes. |
|
| |
Mirror vibration