|
|
Cruiser
Posts: 232
| OK, wife has bought me thrush muffler along with the lower wings,bash plate,22'' shield, along with many other goodies. Now the question is can u good people give me idles on what exhaust tip i may go with (cheap)
on the end of mufflers? |
|
| |
|
Visionary
Posts: 1365
Central Maryland | Good question. We have a wealth of knowledge on this board for installing the Thrushes, but not much for sources regarding tips. I will want to watch this thread as well. Will be performing the operation shortly myself.... |
|
| |
|
Puddle Jumper
Posts: 44
Middleburg, Fl. | I saw where someone got tips from an auto parts store O'Reilly I think, and included part numbers. Search the site for Thrush... also check tech ref. as there was a photo install documentary... |
|
| |
|
Puddle Jumper
Posts: 41
Mena, arkansas / 12 vision | There is a vid on you tube that walks you through I and in the comments has what tips he used. I believe it was from a guy on this site |
|
| |
|
Cruiser
Posts: 144
| Try this http://motors.shop.ebay.com/Exhaust-Pipes-Tips-/33633/i.html?LH_BIN... |
|
| |
|
Puddle Jumper
Posts: 24
Hanover, Md | I used the Spectre Performance 25556 resonator tip. It's the tip that was in the thrush mod video. Love the sound of the setup. Cost is about $30.00 per tip. I would think that any 4" tip would work. It would depend on the length of the thrush mufflers that you use. I went with the 31" mufflers. |
|
| |
|
Cruiser
Posts: 233
flagstaff, AZ | TRELL, I picked up a set of "streetglow" tips for mine, "on the cheap" $9. I like the sound and look and if I ever decide to change I'm not out money
(IMG_20110909_145807 (Small).jpg)
Attachments
----------------
 IMG_20110909_145807 (Small).jpg (58KB - 8 downloads)
|
|
| |
|
Visionary
Posts: 1365
Central Maryland | Since I'm getting the 35" overall length Thrushes, I'm concerned about an exhaust tip that is too long for them. Just quickly viewing what's out there; Jegs carries a Flowmaster 2.5" inlet, 4" outlet, 7.5" length tip that may work. I probably will mount the Thrushes first and leave them "tipless" until I can get a better view of the length of tip needed...
http://www.jegs.com/i/Flowmaster/389/15365/10002/-1?parentProductId... |
|
| |
|
Cruiser
Posts: 273
Midlothian, Va. | I got the Dynamax tips (stainless) and had to have them welded onto the mufflers for a tight fit. That stainless just doesn't give. <img border="0" width="720" height="540" src="http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc4/164770_169965243048098_100001038699082_367356_7433339_n.jpg" /><br />
Edited by Biscuit 2011-12-17 8:27 AM
(164770_169965243048098_100001038699082_367356_7433339_n[1].jpg)
Attachments
----------------
164770_169965243048098_100001038699082_367356_7433339_n[1].jpg (74KB - 4 downloads)
|
|
| |
|
Visionary
Posts: 1365
Central Maryland | Biscuit - 2011-12-17 9:23 AM
I got the Dynamax tips (stainless) and had to have them welded onto the mufflers for a tight fit. That stainless just doesn't give. 
Are those 4" diameter outlets? |
|
| |
|
Visionary
Posts: 4278
| roundtwig
Great looking tip's. Where did you find them?
Tks |
|
| |
|
Cruiser
Posts: 273
Midlothian, Va. | john frey - 2011-12-17 11:28 AM roundtwig Great looking tip's. Where did you find them? Tks http://www.jegs.com/i/Dynomax/289/36473/10002/-1
|
|
| |
|
Cruiser
Posts: 233
flagstaff, AZ | john frey - 2011-12-17 9:28 AM
roundtwig
Great looking tip's. Where did you find them?
Tks
believe it or not, a friend spotted them at a Ross department store in the by mens department . go figure |
|
| |
|
Cruiser
Posts: 144
| I have the same tips as Biscuit. But trell said he wanted cheap. Thats why I put that link in there. Remember you get what you pay for. As for me I like the Dynamax for the fact that it is double walled and gives you some back pressure so you dont loose tourq. Dain |
|
| |
|
Cruiser
Posts: 52
DeRidder, LA | I also put 4" tips on mine and have gotten many compliments. It looks beefy. |
|
| |
|
Iron Butt
Posts: 804
Perry Hall, MD | Using the Cherry Bomb mufflers with Vision Gatlin tips. |
|
| |
|
Tourer
Posts: 324
New Orleans, La, | roundtwig what length Trush mufflers did you use. I particularly like your set up. How long are the tips? |
|
| |
|
Cruiser
Posts: 233
flagstaff, AZ | V92SC - 2011-12-18 8:23 AM
roundtwig what length Trush mufflers did you use. I particularly like your set up. How long are the tips?
I used the 31" muffler and the tips are 8 1/4"L x 4" D. |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | I like the LED tips. you can find many styles on ebay.
(EVLV3night.jpg)
Attachments
----------------
EVLV3night.jpg (17KB - 4 downloads)
|
|
| |
|
Tourer
Posts: 366
Albuquerque, NM | Those streetglows look cool both day and night.
http://www.ebay.com/sch/?_nkw=led%20exhaust&_clu=2&_dmpt=Motors_Car...
Edited by nailer 2011-12-18 6:15 PM
|
|
| |
|
Puddle Jumper
Posts: 5
| I have questions: I did the mod to my exhaust with the thrust pipes.. Love the sound now, but was there any adjustments needed to Air intake or Disconect O2 sensors? My bike seems to be running hotter than before mod? Richard |
|
| |
|
Visionary
Posts: 4278
| disconnect the 02's
and am guessing its all in your mind that its running hotter |
|
| |
|
Cruiser
Posts: 196
Asheville, NC | Having 43 years of electrical experience doesn't help me find a good step by step thrush modification tutorial. HELP, please. I have to do my own stuff to save money. I'm not gonna lie, the past 7 years have been tough.
Edited by j.wales 2016-05-16 8:45 PM
|
|
| |
|
Visionary
Posts: 4278
| j.wales - 2016-05-16 8:44 PM Having 43 years of electrical experience doesn't help me find a good step by step thrush modification tutorial. HELP, please. I have to do my own stuff to save money. I'm not gonna lie, the past 7 years have been tough. http://www.bing.com/videos/search?q=victory+thush+mufflers+how+to&view=detail&mid=76B60AF3E61A6252A29976B60AF3E61A6252A299&FORM=VIRE http://www.thevog.net/threads/thrush-mod.56515/ |
|
| |