Vision Wheels 2009

alberts46 Posted 2011-11-25 12:25 PM (#102229) Subject: Vision Wheels 2009 Cruiser Posts: 152 Bonita Springs, FL The wheels on my 2009 Anniversary are not shining like they used to. I have tried all the polishes, etc. not much helps. Any ideas or suggestions??? johnnyvision Posted 2011-11-25 12:57 PM (#102230 - in reply to #102229) Subject: Re: Vision Wheels 2009 Visionary Posts: 4278 First off take a nickle and see if you can scratch the metal. If not then there is a clear coat on the wheels. If you can stop at the auto store and look for metal polish for raw or un polished then buy one of mothers power wheels and have at it. Be careful for polishing wheel to get caught. The more you work at it the better the shine. kevinx Posted 2011-11-25 1:54 PM (#102231 - in reply to #102230) Subject: Re: Vision Wheels 2009 Visionary Posts: 1340 Gainesville Fl Home of the Gators No clear on a billet wheel from Vic. Needs lots of elbow grease, and a good metal polish roundtwig Posted 2011-11-25 2:28 PM (#102232 - in reply to #102229) Subject: Re: Vision Wheels 2009 Cruiser Posts: 233 flagstaff, AZ MMMMMM, elbow grease. XRsteve Posted 2011-11-25 6:50 PM (#102244 - in reply to #102229) Subject: Re: Vision Wheels 2009 Visionary Posts: 2300 Georgia, west of Atlanta Or you could send them to Browns plating and never worry about polishing again..............