|
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | Some of you may have been familiar with my old KP. Well one day I walked up to it, and relized that the only thing left stock on it was the side covers. So in typical fashion; just as I got it exactly like I wanted.....I sold it, and bought a XC.
Things are just getting started with the new girl,b tu thought you might like a look. Here is a couple of shots with a 21" custom wheel, fender, and contrast cut 6 degree rake kit from Kewlmetal
(rake kit 001_800x600_640x480.jpg)
(rake kit 003_800x600_640x480.jpg)
(rake kit 005_800x600_640x480.jpg)
Attachments
----------------
 rake kit 001_800x600_640x480.jpg (66KB - 7 downloads)
rake kit 003_800x600_640x480.jpg (77KB - 7 downloads)
rake kit 005_800x600_640x480.jpg (61KB - 2 downloads)
|
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | great looking bike Kevin. How do you like the floorboards? |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | varyder - 2011-11-10 9:20 PM
great looking bike Kevin. How do you like the floorboards?
Love the room of the X bike boards. Used a set of Vision Highway peg mounts, but changed them up with a set of 1" diameter shifter pegs. Slim look that works fine, and custom |
|
| |
|
Visionary
Posts: 3006
San Antonio, TX | kevinx - 2011-11-10 8:33 PM
Love the room of the X bike boards. Used a set of Vision Highway peg mounts, but changed them up with a set of 1" diameter shifter pegs. Slim look that works fine, and custom
Great idea using shifter pegs. I have never used the full length of the stock highway pegs. I am going shopping! Bigger is not always better.
It looks like you mounted the directly to the highway peg mounts without the pivot point. Did I see that correctly? I am guessing that the pivot would not be needed anyway on a shorter peg.
Edited by radioteacher 2011-11-10 10:21 PM
|
|
| |
|
Cruiser
Posts: 100
Hudson, Ohio | Kevin....very nice, but you would look better on a Vision LOL |
|
| |
|
Visionary
Posts: 2118
Pitt Meadows, BC Canada | I saw him riding my Vision after KevinXinating it. Not a pretty sight. I think he'd look better in coveralls in his shop - making better Visions ....
SNAP goes my whip! Get to work on our bikes, Kevin !
|
|
| |
|
Puddle Jumper
Posts: 23
| Hey Kevin...very nice bike....not an extreme rake. just right with the 21" and fender setting it off KEWL!!! |
|
| |
|
Visionary
Posts: 1340
Gainesville Fl Home of the Gators | radioteacher - 2011-11-10 11:21 PM
kevinx - 2011-11-10 8:33 PM
Love the room of the X bike boards. Used a set of Vision Highway peg mounts, but changed them up with a set of 1" diameter shifter pegs. Slim look that works fine, and custom
Great idea using shifter pegs. I have never used the full length of the stock highway pegs. I am going shopping! Bigger is not always better.
It looks like you mounted the directly to the highway peg mounts without the pivot point. Did I see that correctly? I am guessing that the pivot would not be needed anyway on a shorter peg.
You are correct. Just added the Avon shifter pegs from Nometz |
|
| |
|
Iron Butt
Posts: 965
New York State | Very sweet looks like a cruise is no problem.
|
|
| |