|
|
Puddle Jumper
Posts: 6
| Does anyone have the same problem? What aftermarket products can be used as I have not found direct replacements. |
|
| |
|
Iron Butt
Posts: 763
Anderson, IN (48mi NE of downtown Indianapolis) | Not sure what you mean by "brake and clutch pegs". Do you mean rear brake and shifter pegs? |
|
| |
|
Cruiser
Posts: 118
Capitol Region of NH | Kuryakyn sells a dirct replacement for them. Slightly bigger, much better looking.
|
|
| |
|
Cruiser
Posts: 160
Camas Washington | +1 on the Kury. I replaced mine with the Kury. They are about 3/4 to 1 inch longer than the stock which is a lot for a peg. |
|
| |
|
Visionary
Posts: 4278
| dennis Kirk carry's a 3 1/4" peg for 11.95 p/n H50054 its the longest one I have ever seen. You have to go to the hardware store and buy a new bolt cause it comes with a sae bolt |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | Arlen Ness has great pegs designed for the Victory that are fatter and longer. |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | VICTORYTCRIDER - 2011-10-16 8:53 PM
Kuryakyn sells a dirct replacement for them. Slightly bigger, much better looking.
got a part# or is it listed under Victory Vision accesories? It's been a while since I been there? |
|
| |
|
Iron Butt
Posts: 721
| The Kuryakyn part number for the long iso shift peg is 8856, you can get them off of eBay for around $20 each with free shipping.
http://www.ebay.com/itm/KURYAKYN-LONG-SHIFT-BRAKE-PEG-VICTORY-MODEL... |
|
| |
|
Visionary
Posts: 8144
New Bohemia, VA | thanks for the info T-Man. I guess I should think before I type, I'm looking for a brake pedal, do the K-folks have them now, or is it just Peggy? |
|
| |
|
Iron Butt
Posts: 721
| Just pegs that I know of. |
|
| |
|
Puddle Jumper
Posts: 37
|
http://shop.arlenness.com/c-176-billet-shifter-peg.aspx
I have the Knurled Flare Tip for shifter and brake. |
|
| |
|
Cruiser
Posts: 199
Salt Lake City | I also got Ness pegs, but would still like a brake pedal..... |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | Victory makes one for the PD bikes, but I'm not sure how to get your hands on one. Maybe talk to a dealer that services them. |
|
| |
|
Iron Butt
Posts: 639
Tri Cities, WA | I replaced both of mine because I also found them to be way to short. I replaced mine with the Arlen Ness knurled pegs and then installed rubber o rings for more grip and they work great. Ran me about $75+ for the pair. |
|
| |
|
Visionary
Posts: 1229
Rancho Cucamonga, CA | Victory Billet Brake Pedal - $185
http://victorypolicemotorcycles.com/products.html
Edited by Nozzledog 2011-10-19 7:41 PM
(billetbrakepedal.jpg)
Attachments
----------------
 billetbrakepedal.jpg (42KB - 0 downloads)
|
|
| |
|
| I have these on my site. Plus several others too.
http://www.noemtz.com/pegs.htm 
|
|
| |